These links are being provided as a convenience and for informational purposes only; they do not constitute an endorsement or an approval by [The author] of any of the products, services or opinions of the corporation or organization or individual. [The author] bears no responsibility for the accuracy, legality or content of the external site or for that of subsequent links. Contact the external site for answers to questions regarding its content.
The Avionté integration with Adobe Sign enables users to handle all onboarding paperwork. As both an Avionté and Adobe client you can benefit from the following:
- Seamless integration with document management, making it easy to send and receive documents from employees without leaving Avionté
- Email notifications for each action taken, that is, when the document was received, viewed, and signed.
- Auto-fill information, directly from Avionté into your documents, or pull important information from the documents, directly into Avionté!
As a prerequisite to this article, be sure the Adobe Sign integration has been configured.
- If you have transitioned from AviontéAero to BOLD, you may have migrated Adobe documents.
Additional Supporting Documentation
- Click here for detailed information about Adobe Mapping.
- Click here for more information about Adobe Sign integration.
- Click here to learn about Migrated Documents in AviontéBOLD.
Upcoming change: There is a new release of Adobe Sign coming in September 2021. When attempting to sign an Adobe document, users will be prompted to accept Adobe's Terms & Conditions before they can view/sign the document. Click here to learn more about this new release.
Adobe Sign Limitations
List last updated on 09/16/2021
- PDF: Adobe Fill & Sign supports most PDFs. However, the following two types of PDFs are not supported at this point:
- Secured PDFs - When uploading a secure PDF, you will see an error message that conveys that the PDF contains editing restrictions and is not supported.
- Some LiveCycle Designer forms - For dynamic XFA PDFs created by LiveCycle, you will see an error message that conveys that Dynamic XFA is not supported.
- Microsoft Office files: DOC, DOCX, XLS, XLSx, PPT, PPTX
- Image files: JPG, PNG, GIF, TIF
- Text files: TXT, RTF, ODT
Transactions and Sizes
Avionté clients should be setup with the Enterprise license.
- Table last updated on 09/16/2021
Available Standard Templates
Before users can send e-signature documents to talent, document templates need to be built and created in Adobe Sign. Before you begin creating your documents from scratch, please note that Avionté offers pre-made templates for the below following documents.
The templates listed below are pre-mapped and do not require any editing for use. Download the PDF template, then upload to Adobe Sign account. Lastly, configure the newly added form within the BOLD platform.
|File||Document Name||Last Updated Date||Prior Version Name / Notes|
Federal & State
|Federal I-9||Form I-9 (Rev. 10/21/2019)||4/16/2020||Form I-9 (rev. 07/17/2017)|
|Federal I-9 With Preparer||Form I-9 with Preparer (Rev. 10/21/2019)||4/16/2020||Form I-9 with preparer (rev. 07/17/2017)|
|Federal W4||Federal W4 (2021)||8/17/2021||Federal W4 (2020)|
|Federal W4-SP||Federal W4-SP (2021)||8/17/2021||Federal W4-SP (2020)|
|Alabama W4||AL-A4 (Rev. 3.14)||6/7/2021|
|Arizona W4||AZ A-4 (2021)||12/29/2020|
|Arkansas W4||AR4-EC (Rev. 12.20)||12/29/2020|
|California W4||CA DE-4 (Rev. 1.21)||4/12/2021|
|Connecticut W4||CT W-4 (Rev.12.20)||1/13/2021||Reduced Withholding Instructions|
|District of Columbia W4||DC D-4 (Rev. 12.10)||3/26/2020|
|Delaware W4||DE-W4 (rev. 12.19)||3/26/2020|
|Georgia W4||GA-G4 (Rev. 5.21)||9/21/2021||Mapping Information
GA-G4 (Rev 2.19)
|Hawaii W4||HI HW-4 (Rev. 2019)||3/30/2020|
|Illinois W4||IL W-4 (Rev. 5.20)||1/5/2021|
|Indiana W4||IN WH-4 (Rev. 9.20)||9/16/2021|
|Iowa W4||IA W-4 (Rev. 7.20)||12/29/2020|
|Idaho W4||ID W-4 (Rev. 12.20)||1/11/2021|
|Kansas W4||KS K-4 (Rev. 11/18)||10/22/2019|
|Kentucky W4||KY W4 (Rev. 9.20)||2/19/2021|
|Louisiana W4||LA L-4 (Rev. 4.11)||4/2/2020|
|Maine W4||ME W-4 (Rev. 12.20)||1/12/2021|
|Maryland W4||MD-MW507 (Rev. 12.20)||7/13/2021|
|Massachusetts W4||MA M-4 (Rev. 11.19)||4/2/2020|
|Michigan W4||MI-W4 (Rev. 12.20)||1/11/2021|
|Minnesota W4||W-4MN (2021)||1/11/2021|
|Mississippi W4||MS W-4 (Rev. 09.20)||1/19/2021|
|Missouri W4||MO W-4 (Rev. 12.20)||12/29/2020|
|Montana W4||MT MW-4 (2020)||4/2/2020|
|Nebraska W4||NE W-4N (Rev. 12.20)||12/29/2020|
|New Jersey W4||NJ-W4 (Rev. 1.21)||1/19/2021|
|New York W4||NY IT-2104 (2021)||12/16/2020|
|North Carolina W4||NC-4 (Rev. 9.20)||2/22/2021|
|North Carolina W4 EZ||NC-4EZ (Rev. 11/19)||3/30/2020|
|Ohio W4||OH IT-4 (Rev. 12/20)||12/04/2020|
|Oklahoma W4||OK-W-4 (Rev. 3.18)||3/26/2020|
|Oregon W4||OR W-4 (Rev. 8.20)||12/28/2020|
|Pennsylvania Non-Withholding||PA REV-419 (Rev. 6.18)||10/08/2020|
|Rhode Island W4||RI W-4 (2021)||1/12/2021|
|South Carolina W4||SC W-4 (Rev. 9.20)||12/28/2020|
|Vermont W4||VT W-4 (Rev. 12.18)||3/26/2020|
|Virginia W4||VA-4 (Rev. 08.11)||7/29/2020|
|Wisconsin W4||WI WT-4 (Rev. 6.20)||12/28/2020|
|Federal TD1||Federal TD1||7/22/2021|
|Alberta TD1||Alberta TD1||7/22/2021|
|British Columbia TD1||British Columbia TD1||7/22/2021|
|Manitoba TD1||Manitoba TD1||7/22/2021|
|Ontario TD1||Ontario TD1||7/22/2021|
|Saskatchewan TD1||Saskatchewan TD1||7/22/2021|
Michigan Local W4s
|Albion MI W4||Albion MI W4||7/12/2021|
|Battle Creek MI W4||Battle Creek MI W4||7/12/2021|
|Benton Harbor MI W4||Benton Harbor MI W4||7/12/2021|
|Big Rapids MI W4||Big Rapids MI W4||7/12/2021|
|Detroit MI W4||Detroit MI W4||7/12/2021|
|East Lansing MI W4||East Lansing MI W4||7/12/2021|
|Flint MI W4||Flint MI W4||7/12/2021|
|Grand Rapids MI W4||Grand Rapids MI W4||7/12/2021|
|Grayling MI W4||Grayling MI W4||7/12/2021|
|Hamtramck MI W4||Hamtramck MI W4||7/12/2021|
|Highland Park MI W4||Highland Park MI W4||7/12/2021|
|Hudson MI W4||Hudson MI W4||7/12/2021|
|Ionia MI W4||Ionia MI W4||7/12/2021|
|Jackson MI W4||Jackson MI W4||7/12/2021|
|Lapeer MI W4||Lapeer MI W4||7/12/2021|
|Lansing MI W4||Lansing MI W4||7/12/2021|
|Muskegon MI W4||Muskegon MI W4||7/12/2021|
|Muskegon Heights MI W4||Muskegon Heights MI W4||7/12/2021|
|Pontiac MI W4||Pontiac MI W4||7/12/2021|
|Portland MI W4||Portland MI W4||7/12/2021|
|Port Huron MI W4||Port Huron MI W4||7/12/2021|
|Saginaw MI W4||Saginaw MI W4||7/12/2021|
|Springfield MI W4||Springfield MI W4||7/12/2021|
|Walker MI W4||Walker MI W4||7/12/2021|
Creating New E-Signature Document Templates
To create a new template for collecting e-signatures, follow the instructions below:
- Templates for e-signature documents need to begin from an existing document, which you will upload to Adobe Sign. Create a document you want to base your template on in Microsoft Word, Pages, or any other document creation software that allows you to save the document as a PDF. You will then upload this document to Adobe.
- Open your Adobe Sign account. The easiest way to access your account is through Avionté
- Once Adobe Sign opens, you may be prompted to sign into your account. Sign in using the credentials provided during your integration setup with your Account Manager.
- In the Adobe Home screen, click Add Template to Library.
- Enter a Template Name. This is a free-text field and will set the title of the document. This title will be visible to internal users and your talent when you send the document via Avionté Talent Tasks.
- Upload the document you created that will be the basis of your new e-signature document. Locate the document you created and drag and drop it into the Drag & Drop Files Here area or click Add Files to browse your computer for the file.
- Once the document is uploaded, click Preview & Add Fields. You will now see a preview of your uploaded document.
- Now you will drag and drop Adobe's fields onto our document in the appropriate locations. You can use an Adobe field wherever you would like to add dynamic content or have talent complete information (example: provide their address, check a box, sign the document, etc.)
- Map the necessary fields from Adobe to Avionté. Click here Click here to go to the section for Mapping Fields in Adobe Sign.
- Once the document is complete, click Save. The template will now be available in your Adobe Library in Avionté.
Mapping Fields in Adobe Sign Documents to Avionté
When a form is pulled into an Adobe Sign account, its fields do not yet communicate with Avionté. In order to get information to flow from Avionté into the document or vice versa, you need to complete some document mapping.
Field Mapping Types
When mapping fields in an e-signature document to Avionté, users can configure the data to map in one of three different ways. You can pull data into the form from Avionté if it's available, have information from the document write into Avionté, or have data go in both directions. Avionté refers to these options as Read, Write or Edit between the document and Avionté:
|Read||The user is unable to edit the document field. The document will read data that exists in the Avionté application and automatically populate the data into the document field.|
|Write||The user is able to edit the document field. Data written into the document field by the user will be sent to the Avionté application.|
|Edit||The user is able to edit the document field. The document will read data that exists in the Avionté application and automatically populate the data into the document field, however, the user is able to change the data in the document field. If the user edits the field, the new data will flow back into the application.|
Instructions for Field Mapping
To connect a field in an e-signature document with Avionté, follow the instructions below:
- Right-click on a field in the document within Adobe.
- Click the pencil icon next to the field title (Example: "Custom Field 1")
- Change the name of the field to the appropriate mapping phrase.
- Click here for more information about the mapping from Adobe.
Note: The field name needs to appear exactly as it does in the Mapping Key, including the case and spaces, so the best practice is to copy/paste from the key provided below.
- Click here for more information about the mapping from Adobe.
- Click OK. Repeat steps 1-4 for all necessary fields in the document.
- Save the document. Now your template is ready for use in Avionté
Field Mapping Key
The fields that are available to map to Adobe Sign document templates vary among Avionté's product generations (BOLD, AERO, etc.) Below are links to Mapping Keys for each of Avionté's product generations. Click on the generation you are using to view the field mappings available: